User`s manual

79
OSPF Settings :
 OSPF Service : By default, it's Disable. To Enable to activated OSPF routing service.
 Route ID : The router ID is typically derived by each router from its interface IP address.
 Distribute RIP over OSPF : Allow RIP routes will redistributed into OSPF.
RIP Settings :
 RIP Service : By default, it's Disable. To Enable to activated RIP routing service.
 Side : Specify desired interface WAN, LAN for sending and receiving of RIP packets.
 Distribute OSPF over RIP : Allow OSPF routes redistributed into RIP.
Change these settings as described here and click Save button to save your changes. Click
Reboot button to activate your changes