User`s manual

36
 WEP Key Update Period: The time interval WEP will then be updated; the unit is in
seconds; default is 300 seconds; 0 = do not rekey.
 EAP Reauth Period: EAP re-authentication period in seconds; default is 3600; 0 =
disable re-authentication.
Authentication RADIUS Server Settings
 Authentication Server: Enter the IP address of the Authentication RADIUS server.
 Port: The port number used by Authentication RADIUS server. Use the default 1812 or
enter port number specified.
 Shared secret: The secret key for system to communicate with Authentication RADIUS
server. Support 1 to 64 characters.
 Accounting Server: Check on the respected button to enable either Enable or Disable
accounting RADIUS server.
Secondary Authentication RADIUS Server
 Authentication Server: Enter the IP address of the Authentication RADIUS server.
 Port: The port number used by Authentication RADIUS server. Use the default 1812 or
enter port number specified.
 Shared secret: The secret key for system to communicate with Authentication RADIUS
server. Support 1 to 64 characters.
3.8 WDS Setup - Expand your Wireless Network
In AP mode only supports four WDS function on VAP0
 Service: By default, it's “Disable”. To “Enable” to activate WDS
 Enable: Click Enable checkbox to create WDS link.
 WDS Peer's MAC Address: Enter the MAC address of WDS peer.
 Description: Description of WDS link.
Change these settings as described here and click Save button to save your changes. Click
Reboot button to activate your changes.