User`s manual

3.2 External Network Connection

Network Requirement

Normally, 100GX-N connects to a wired LAN and provides a wireless connection point to

associate with wireless client. Then, Wireless clients could access to LAN or Internet by

associating themselves with 100GX-N set in AP mode.

3.3 Configure 100GX-N LAN IP Address

Here are the instructions to setup the local IP Address and Netmask

Please click on System -> LAN and follow the below setting.

Ethernet Connection Type

Check either “Static IP” or “Dynamic IP” button as desired to set up the system IP of LAN

port.

 Static IP: The administrator can manually setup the LAN IP address when static IP is

available/ preferred.

 IP Address : The IP address of the LAN port; default IP address is 192.168.2.254

 IP Netmask : The Subnet mask of the LAN port; default Netmask is 255.255.255.0

 IP Gateway : The default gateway of the LAN port

 Dynamic IP: This configuration type is applicable when the 100GX-N is connected to a

network with the presence of a DHCP server; all related IP information will be provided by

the DHCP server automatically.