User`s manual

 Finishing Wizard

Click Finish button to save your setting. please wait till completion of the reboot process.

3. AP Mode Configuration

When AP mode is chosen, the system can be configured as an Access Point. This section provides

detailed explanation for users to configure in the AP mode with help of illustrations. In the AP mode,

functions listed in the table below are also available from the Web-based GUI interface.

3.1 Chose Your Operating Mode ( AP Mode )

100GX-N Operating mode support four operational modes, AP mode, the WDS mode, the CPE

mode and the Client Bridge + Repeater AP mode, respectively with built-in remote

management features.

The system administrator can set the desired mode via this page, and then configure the

system according to their deployment needs, Please click on System -> Operating Mode and

follow the below setting.