Safety data sheet

ManualsBrandsCERESIT ManualsAdhesives, Adhesive Tapes & Hook & Loop FastenersMortar Wand Reparatur 5 kg

Safety Data Sheet according to (EC) No 1907/2006

Page 1 of 10

Ceresit Wand spezial Reparaturmörtel

SDS No. : 162788

V002.2

Revision: 31.05.2015

printing date: 21.01.2016

Replaces version from: 24.07.2014

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Ceresit Wand spezial Reparaturmörtel

Contains:

Cement, portland, chemicals, low chromate

Calcium dihydroxide

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use:

Fast-setting mortar

1.3. Details of the supplier of the safety data sheet

Henkel AG & Co. KGaA

Henkelstr. 67

40589

Düsseldorf

Germany

Phone:

+49 (211) 797 0

Fax-no.:

+49 (211) 798 4008

ua-productsafety.de@henkel.com

1.4. Emergency telephone number

The Henkel information service also provides an around-the-clock telephone service on phone no.+49-(0)211-797-3350 for

exceptional cases.

Further information is available at Poison Control Centers.

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (CLP):

Serious eye damage

Category 1

H318 Causes serious eye damage.

Skin irritation

Category 2

H315 Causes skin irritation.

Specific target organ toxicity - single exposure

Category 3

H335 May cause respiratory irritation.

2.2. Label elements

Label elements (CLP):

Summary of content (10 pages)

PAGE 1
Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 10 SDS No. : 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Revision: 31.05.2015 printing date: 21.01.2016 Replaces version from: 24.07.2014 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Ceresit Wand spezial Reparaturmörtel Contains: Cement, portland, chemicals, low chromate Calcium dihydroxide 1.2.
PAGE 2
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 2 of 10 Hazard pictogram: Signal word: Danger Hazard statement: H315 Causes skin irritation. H318 Causes serious eye damage. H335 May cause respiratory irritation. Precautionary statement: P102 Keep out of reach of children. P260 Do not breathe dust. P280 Wear protective gloves/eye protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
PAGE 3
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 3 of 10 Inhalation: Remove person from dust-contaminated zone, seek medical advice if necessary. Skin contact: Rinse with running water and soap. Skin care. Remove contaminated clothes immediately. Eye contact: Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes. If pains remains (intensive smarting, sensivity to light, visual disturbance) continue flushing and contact/seek doctor or hospital.
PAGE 4
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 4 of 10 7.1. Precautions for safe handling Avoid dust formation. Avoid skin and eye contact. Hygiene measures: Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. 7.2. Conditions for safe storage, including any incompatibilities Store in sealed original container protected against moisture. Store in a cool, dry place. Avoid strictly temperatures below 0 °C and above + 50 °C.
PAGE 5
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 5 of 10 Biological Exposure Indices: None 8.2. Exposure controls: Respiratory protection: In case of dust formation, we recommend wearing of appropriate respiratory protection equipment with particle filter P. This recommendation should be matched to local conditions. Hand protection: In the case of longer contact protective gloves made from nitrile rubber are recommended according to EN 374.
PAGE 6
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 6 of 10 10.2. Chemical stability Stable under recommended storage conditions. 10.3. Possibility of hazardous reactions See section reactivity 10.4. Conditions to avoid None if used for intended purpose. 10.5. Incompatible materials None if used properly. 10.6. Hazardous decomposition products None known. SECTION 11: Toxicological information 11.1.
PAGE 7
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 7 of 10 Serious eye damage/irritation: Hazardous components CAS-No. Calcium dihydroxide 1305-62-0 Result Exposure time Category 1 (irreversible effects on the eye) Species Method rabbit OECD Guideline 405 (Acute Eye Irritation / Corrosion) SECTION 12: Ecological information General ecological information: Do not empty into drains, soil or bodies of water.
PAGE 8
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Product disposal: Dispose of waste and residues in accordance with local authority requirements. Disposal of uncleaned packages: Use packages for recycling only when totally empty. Waste code 170101 SECTION 14: Transport information 14.1. UN number ADR RID ADN IMDG IATA 14.2. UN proper shipping name ADR RID ADN IMDG IATA 14.3.
PAGE 9
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 9 of 10 SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture VOC content 0,00 % (VOCV 814.018 VOC regulation CH) 15.2. Chemical safety assessment A chemical safety assessment has not been carried out. National regulations/information (Germany): WGK: 1, slightly water-endangering product.
PAGE 10
MSDS-No.: 162788 V002.2 Ceresit Wand spezial Reparaturmörtel Page 10 of 10 SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. Further information: The product is intended for industrial use.