Instruction Manual

October 1996
Supersedes sheet dated 12/95
10/96
5M
CPY-IG
Printed in U.S.A.
Cerberus Pyrotronics
8 Ridgedale Avenue
Cedar Knolls, NJ 07927
Tel: [phone]
FAX: [phone]
Connection Diagram
FOR STYLE W (CLASS B)
Connect terminal 1 of PL-35
to the following:
SXL Terminal BL1-2, BL2-2
FOR STYLE Z (CLASS A)
Both negative supervisory lines must be separately fused. Connect to the PL-35 terminals as follows:
SXL, terminal BL1-2 terminal 1 —
terminal BL2-2
SZE-8A terminal BL1-2 — terminal 1
terminal BL2-2
PL-35, Circuit 1PL-35, Circuit 1 PL-35, Circuit 2PL-35, Circuit 2
Cerberus Pyrotronics
50 East Pearce Street
Richmond Hill, Ontario
L4B, 1B7 CN
Tel: [phone]
FAX: [phone]
* The + supervisory line may be wired
directly to the control panel or may be
wired thru PL-35 to the panel.
firealarmresources.com