Owner's Manual

MXL-GT
MXL-G
MXL-G Color Graphics
MXL-G is a PC based color graphics display package
designed for use with the Cerberus Pyrotronics MXL
system. It is used to monitor alarms, supervisories,
troubles and security violations as detected by the MXL.
Up to 10 levels of zoom screens can be associated with
each device. It also acts as a fully interactive operator
terminal with disk based event logging. PC ordered
separately.
MXL-VDT
TSP-40
MXL-GT Color Interactive Terminal with History
Reporting
MXL-GT is a PC based color terminal for use with the
Cerberus Pyrotronics MXL system. It consists of a serial
interface module and software which allow a standard PC
to act as a fully interactive secondary operator terminal as
well as providing a comprehensive disk based event
logging. PC ordered separately.
TSP-40 Thermal Strip Printer
The TSP-40 is a thermal strip printer designed for use with
the Cerberus Pyrotronics MXL system. It mounts in the
MXL enclosure and its printout is visible through a window
in the locked enclosure door. Printouts are automatically
spooled on a take-up reel for easy record storage.
RCC-1 Remote Command Console
The RCC-1 is a remotely located MXL annunciator display
module. The RCC-1 contains an 80 character LCD display
and control keypad (MKB) and a PS-5N7 network inter-
face. RCC-1s can be located anywhere that control or
annunciation is required. RCC-1 can be programmed for
display only or can provide display and system control. If a
PIM-1 is added to the RCC-1, remote printers, VDT, or
graphics computers can be located throughout a facility.
RCC-1
MPS-12 Power Supply
The MPS-12 is a fully supervised power supply which
provides the system with preliminary DC power. It is rated
at 12 amp. and is unfiltered and unregulated. It supplies
the PSR-1 and its expansion modules with power required
for normal operation. The unit incorporates a resettable
circuit breaker on the primary input and includes a built-in
AC line filter for surge and noise suppression. The MPS-12
mounts in the MXL enclosure backbox.
MPS-12
PIM-2 Parallel Printer Interface
The PIM-2 is an MXL or CXL parallel printer interface
module. PIM-2 connects to PIM-1 to allow MXL connection
and supervision of any EDP UL listed printer.
firealarmresources.com