Owner's Manual

Remote Annunciators may be mounted side by side, by
using modular electrical boxes. Add two additional gangs
for each additional Remote Annunciator (i.e., use a three
gang box for two annunciators). Remote Annunciators can
be connected to the Network Communication Line by
utilizing the screw terminals provided on the module.
Mechanical and Environmental
Input Power: 24 VDC
Operating Current: 10mA (Alarm LEDs only)
54mA (All LEDs lit)
Operating Temperature: 0°C to +49°C
Relative Humidity: 85% non-condensing
Dimensions: 4
1
/
4
" H x 3
5
/
8
" W x 1
1
/
16
" D
Weight: 12 oz.
Optional Cabinet for
Multiple Units (12 max.): 24
5
/
8
" x 14
1
/
2
" x 5
5
/
8
"
Mounting (Single Units): Single gang electrical box
(standard)
Wiring Diagram
Ordering Information
NOTICE: The use of other than Cerberus Pyrotronics detectors and bases with Cerberus
Pyrotronics control equipment will be considered a misapplication of Cerberus Pyrotronics
equipment and as such void all warranties either expressed or implied with regards to loss,
damage, liabilities and/or service problems.
Model No. Part No. Description
LED-1 500-679588 Remote Annunciator Unit-White
LED-2 500-679594 Remote Annunciator Unit-Black
LED-CAB 500-679649
Annunciator Cabinet (Max. 12
LED-1s or LED-2s)
MAG 500-679601 Programming Tool
March 1994
Supersedes sheet dated 8/93
Cerberus Pyrotronics
50 East Pearce Street
Richmond Hill, Ontario
L4B, 1B7 CN
Tel: [phone]
FAX: [phone]
3/94
10M
CPY-IG
Printed in U.S.A.
Cerberus Pyrotronics
8 Ridgedale Ave.
Cedar Knolls, NJ 07927
Tel: [phone]
FAX: [phone]
firealarmresources.com