Owner's Manual

l S-Strobes 15, 15/75, 75 & 110
Candela Models
l SS-Strobes-Synchronized
l MTL - 8 Tone Electronic Horns
l MTLS - 8 Tone Horn Strobes
l E - Single Tone Horns
l ES - Single Tone Horn Strobes
l HN - Electro-Mechanical Horn
l HNS - Electro-Mechanical Horn-
Strobes
l SM - Speakers ¼ to 2 Watt and
Speaker Strobes
l SH - High Output Speakers
1
/3 to 2½
Watts and Speaker Strobes
l Meet the Americans with Disabilities
Act
l Meet UL 1971
F-Series Notification Appliances
Notification Appliances
Cerberus Pyrotronics F-Series Notification Appliances will satisfy the requirements of ADA and UL 1971 and are UL, ULC
Listed compatible with our systems. Additionally, they provide for a range of tones, audibility levels, strobe power and
synchronization of strobes to meet the needs of all types of building occupancy. F-Series devices also feature low power
consumption to minimize system demand and low in-rush duration to improve system reliability.
How to Read F-Series Signal Model Numbers
Most F-Series products follow a simple pattern as follows: the first series of letters/numbers describe the base signal class,
the second set describe the strobe if applicable, the third set describes the mounting configuration. Please refer to the
specific catalog sheet for each base signal class.
Example: MTL - S17S - FW
MTL= 8-tone multi-tone horn
MC= 3-tone horn
EC= Electronic chime
EH= Electronic horn
EW= Electronic slow-whoop
HN= Electron-mechanical horn
HNH= Electron-mechanical, high dB
MH= Mini-horn
MMT= 8-tone in mini-horn plastic
TTH= Tri-tone horn
SM25= Lo-profile 25 volt speaker
SM70= Lo-profile 70 volt speaker
SH25= High output 25 volt speaker
SH70= hHgh output 70 volt speaker
BF= Bell 4 inch
BS= Bell 6 inch
BE= Bell 8 inch
BT= Bell 10 inch
CH= Mechanical chime
S15= 15 cd strobe
S17= 15/75 cd strobe
S75= 75 cd strobe
S110= 110 cd strobe
S15S= 15 cd strobe, synchronous
S17S= 15/75 cd strobe, synchronous
S75S= 75 cd strobe, synchronous
-EP= Explosion proof
-LC= Low current draw
-SS= Single stroke
-AC= 120 VAC
-6060H= 6” x 6” horizontal
-6090V= 6” x 9” vertical
-S= Surface mount
-SW= Surface, white
-F= Flush mount
-FW= Flush, white
-C= Ceiling mount
firealarmresources.com