Owner's Manual

l 25 or 70.7 VRMS Audio (Field Selected)
l True 100 Watts RMS Output Capacity
l Up to 11 Optional Speaker and Strobe
Circuit Modules in One Cabinet
l All Outputs are Power Limited & Supervised
l Style Y (Class B) and Style Z (Class A)
Speaker and Strobe Circuits
l Dry Contact or polarity reversal Activation
l Activation Inputs are Fully Supervised
l Optional Digital MessageMaker is Field
Programmable
l Coded Tone Option
l Backup Evacuation Tone Option
l Stand Alone or for Use with any Fire Alarm/
Suppression Control Panel
l Listed, ULC Listed, CSFM, NYMEA
Approved
VoiceCom Voice/Alarm Communication System
PAD-2 Auxiliary Power Supply / NAC Extender
l 6 Amps of Notification Appliance Power
l Advanced Microprocessor Control
l 24 VDC Regulated Output Voltage
l Four Power-Limited Notification Outputs
l Synchronized ANSI Temporal Pattern
l Class ‘A’ Selectable
l Ground Fault Detection
l Battery Supervision
l 3 Amp Auxiliary Power Output
l Trouble Contact for Monitoring
l Listed
Order Model VoiceCom, Part No. 500-693713 (50 Watts)
Order Model VoiceCom-MM, Part No. 500-693714
(50 Watts with MessageMaker)
Order Model VoiceCom-L, Part No. 500-694227 (100 Watts)
Order Model PAD-2, Part No. 500-694275
Building Evacuation
The Americans with Disabilities Act has driven the need for
notification capacity in all buildings. VoiceCom Emergency
Voice/Alarm Evacuation System and the PAD-2 NAC
Extender provide for the control of notification appliances
throughout any structure. Both products can be configured
in multiple ways to meet local codes for installation as well
as for safe building evacuation.
firealarmresources.com