User manual

Page 94
5.1 System
The System object provides access to general operating parameters of the device.
The System object corresponds to the System Group MIB2 described in RFC-3418.
5.1.1 System Commands
5.1.1.1 Set
A
ssign and modify device parameters using the Set command:
set system
[contact <string>]
[name <string>]
[location <string>]
[date <yyyy.mm.dd>]
[time <hh:mm:ss>]
5.1.1.2 Show
Display device parameters using the Show command:
show system [{info | description | snmpid | uptime | contact |
name | location | voltage | temperature | date | time}]
5.1.1.3 Reset
Reboot the device using the Reset command:
reset system
All device parameters will be set to their default values.
When using this command, the CLI prompts for an explicit [y/n] confirmation prior to its
execution.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]