User manual

Page 68

EH 5 Configuration

Configure RF:

set rf role master frequency 74000 mode adaptive

Configure the IP address:

set ip ip-addr 10.0.0.55 route 10.0.0.1

Remove C-components C2, C3 and C4 and attach all the external interfaces to the S-

component:

clear bridge c2, c3, c4

Configure management for the VLAN:

set vlan c1 111 egress host, s1 untagged host

set vlan s1 111 fdb-id 5 egress c1, eth0, eth1, eth2

Configure bridge port management

set bridge-port c1 s1 admit tagged filter enabled

set bridge-port c1 host pvid 111 prio 6 admit untagged

set bridge-port s1 c1 pvid 111 prio 6

Configure Service VLANs

set vlan s1 2000 fdb-id 11 egress eth2, eth0

set vlan s1 1000 fdb-id 10 egress eth1, eth0

EH 6 Configuration