User manual

Page 66
set vlan c3 111 egress eth1, s1
set vlan s1 111 fdb-id 5 egress c1, eth0, eth2
Configure bridge port management:
set bridge-port c1 s1 admit tagged filter enabled
set bridge-port c1 host pvid 111 prio 6 admit untagged
set bridge-port s1 c1 pvid 111 prio 6
Map the Management C-VLAN to the Management S-VLAN:
set cvlan-reg c3 eth1 111 svid 111
Configure Customer VLANs:
set vlan c3 200-203 egress eth1, s1
Configure Service VLAN:
set vlan s1 1000 fdb-id 10 egress c3, eth2, eth0
Map the Customer VLANs to the Service VLANs:
set cvlan-reg c3 eth1 200 svid 1000
set cvlan-reg c3 eth1 201 svid 1000
set cvlan-reg c3 eth1 202 svid 1000
set cvlan-reg c3 eth1 203 svid 1000
EH 3 Configuration
Configure RF:
set rf role master frequency 74000 mode adaptive
Configure the IP address:
set ip ip-addr 10.0.0.53 route 10.0.0.1
Remove C-components C2 and C4 and attach the interfaces ETH0 and ETH2 to the
S-component:
clear bridge c2, c4
Configure management for the VLAN:
set vlan c1 111 egress host, s1 untagged host
set vlan c3 111 egress eth1, s1
set vlan s1 111 fdb-id 5 egress c1, c3, eth0, eth2
Configure bridge port management:
set bridge-port c1 s1 admit tagged filter enabled
set bridge-port c1 host pvid 111 prio 6 admit untagged
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]