User manual

Page 64
Note that customer Ethernet services from port ETH1 that arrive with different VLAN IDs
and priorities will be transferred as-is.
4.5.3 Creating a Multiple Customer VLAN Configuration
This VLAN configuration example is for FibeAir 70 sites serving multiple customers or service
providers. It comprises:
• Ten paired FibeAir 70 RF units (EH1 through EH10) using local and remote in-
band management VLAN (VID = 111).
• Two separate, unique customer Ethernet VLANs (VIDs = 200-203).
• Customer 1 traffic is encapsulated into the S-VLAN with VID = 1000; Customer
2 traffic encapsulated into the S-VLAN with VID = 2000.
Figure 4-3 FibeAir 70 Multiple Customer VLAN Configuration
EH 1 Configuration
Configure RF:
set rf role master frequency 74000 mode adaptive
Configure the IP address:
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]