User manual

Page 61
set vlan c4 100 egress eth2,s1 untagged eth2
set vlan c2 100 egress eth0,s1 untagged none
Assign VID=100 to port ETH2 and Host towards S1 (with Priority=7):
set bridge-port c1 host pvid 100 prio 7
set bridge-port c4 eth2 pvid 100 prio 7
Disable port ETH1 capability to send untagged traffic on VID=1:
set vlan c3 1 egress none untagged none
Configuring Customer Ethernet Services and In-Band Management
Connect ETH2, ETH0 (RF) and Host ports via S1 using VID=100. ETH2 and Host
data will be untagged; ETH0 (RF) tags will be preserved:
set vlan c1 100 egress host,s1 untagged host
set vlan c4 100 egress eth2,s1 untagged eth2
set vlan c2 100 egress eth0,s1 untagged none
set vlan c3 1 egress none untagged none
Assign VID=100 to ETH2 and Host pots towards S1 (with Priority=7):
set bridge-port c1 host pvid 100 prio 7
set bridge-port c4 eth2 pvid 100 prio 7
Connect port ETH1 and ETH0 (RF) via S1 using customer’s VIDs:
set vlan c2 110 egress eth0,s1 untagged none
set vlan c2 120 egress eth0,s1 untagged none
set vlan c2 130 egress eth0,s1 untagged none
set vlan c3 110 egress eth1,s1 untagged none
set vlan c3 120 egress eth1,s1 untagged none
set vlan c3 130 egress eth1,s1 untagged none
Note that customer Ethernet services from port ETH1 that arrive with different VLAN IDs
will be discarded.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]