User manual

Page 51
3.3.5 Ethernet Interfaces
The FibeAir 70 system consists of 4 Ethernet interfaces:
• Host – management interface
• Eth0 – radio interface
• Eth1 – ODU interface, port 1
• Eth2 – ODU interface, port 2
Set Eth1 and Eth2 ports configuration, if desired configuration is different from default:
• Admin (port enable) – Enable by default
• Auto-negotiation – Enable by default
• Speed
Manually set the port’s speed (10/100/1000, HF/FD) when auto-negotiation disabled.
Set speed to 1000xfd when SFP is used.
To check Ethernet port status for specific interface:
Local_Site> show eth eth1
eth eth1 description : Ceragon
eth eth1 mtu : 9216
eth eth1 mac-addr : 00:24:a4:00:06:d2
eth eth1 admin : up
eth eth1 operational : up
eth eth1 last-change : 0000:00:12:11
eth eth1 name : Eth1
eth eth1 alias :
eth eth1 eth-type : 1000fd
eth eth1 eth-act-type : 1000fd
eth eth1 auto-neg : enabled
eth eth1 loopback-mode : disabled
eth eth1 loopback-timeout : 60
eth eth1 alarm-propagation : disabled
eth eth1 pipe-to : none
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]