User manual

Page 218
It is possible to specify more than one SN in the command by designating indexed objects
(See Section 0 4.9.6.1).
6.15.3 LTR DB Attributes
6.15.3.1 MD Index
This is the same attribute as the one described in Section 6.8.2.1. An entry cannot be
created if a corresponding MD Index does not exist.
6.15.3.2 MA Index
This is the same attribute as the one described in Section 6.9.2.2. An entry cannot be
created if a corresponding MA Index does not exist.
6.15.3.3 MEPID
This is the same attribute as the one described in Section 6.11.2.3. An entry cannot be
created if a corresponding MEPID does not exist.
6.15.3.4 LTR SN
Description Transaction identifier/sequence number returned by a previous transmit
linktrace message command, indicating which LTM's response is going to
be returned.
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.2.1.1 (dot1agCfmLtrSeqNumber)
CLI Attribute Name None
CLI Syntax Integer
Access N/A
CLI Commands
show cfm ltr-db <md-idx> <ma_idx> <mepid> {<SN>} | all
6.15.3.5 LTR Received TTL
Description TTL field value for a returned LTR
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.2.1.3 (dot1agCfmLtrTtl)
CLI Attribute Name rx-ttl
CLI Syntax 0..250
Access RO
CLI Commands
show cfm ltr-db <md-idx> <ma_idx> <mepid> {<SN>} | all
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]