User manual

6.13
Peer MEP Create
6.13.1
Peer MEP Create Commands
Note:
Peer MEP Create CLI commands are availab
Provider Bridge feature is enabled.
6.13.1.1 Set
A Peer MEP entry is created with the Set command:
set cfm-peer-mep-
create <md
The Set command causes automatic creation of entries in the Peer
that have entries in MEP Table and this Peer MEP ID.
6.13.1.2 Show
Peer MEP information is displayed with the Show command:
show cfm-peer-mep-
create [{<md
[{<peer-mepid-
list> | all}}]]
6.13.1.3 Clear
A Peer MEP
entry is deleted with the Clear command:
clear cfm-peer-mep-
create {<md
{<peer-mepid-
list> | all}
The Clear command causes automatic deletion of entries in the Peer MEP DB for all MEPIDs
that have entries in MEP Table
6.13.2
Peer MEP Create Attributes
6.13.2.1
MD Index
This is the same attribute as the one described in
created if a corresponding MD Index does not exist.
6.13.2.2
MA Index
This is the same attribute as the one described in
created if a corresponding MA In
Peer MEP Create
Peer MEP Create Commands
Peer MEP Create CLI commands are availab
le only when the
FibeAir 70
Provider Bridge feature is enabled.
A Peer MEP entry is created with the Set command:
create <md
-idx-list> <ma-idx-list> <peer-mepid
-
The Set command causes automatic creation of entries in the Peer
MEP DB for all MEPIDs
that have entries in MEP Table and this Peer MEP ID.
Peer MEP information is displayed with the Show command:
create [{<md
-idx-list> | all} [{<ma-idx-
list> | all}
list> | all}}]]
entry is deleted with the Clear command:
create {<md
-idx-list> | all} {<ma-idx-
list> | all}
list> | all}
The Clear command causes automatic deletion of entries in the Peer MEP DB for all MEPIDs
that have entries in MEP Table
and this Peer MEP ID.
Peer MEP Create Attributes
MD Index
This is the same attribute as the one described in
Section 6.8.2.1
. An entry cannot be
created if a corresponding MD Index does not exist.
MA Index
This is the same attribute as the one described in
Section 6.9.2.2
. An entry cannot be
created if a corresponding MA In
dex does not exist.
Page 210
FibeAir 70
-
list>
MEP DB for all MEPIDs
list> | all}
list> | all}
The Clear command causes automatic deletion of entries in the Peer MEP DB for all MEPIDs
. An entry cannot be
. An entry cannot be
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]