User manual

Page 200
6.11.2.17 LBM Data TLV
Description An arbitrary amount of data to be included in the Data TLV, if the Data TLV
is selected to be sent.
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.1.1.31 (dot1agCfmMepTransmitLbmDataTlv)
CLI Attribute Name lbm-tx-data
CLI Syntax String of hexadecimal digits. Two digits constitute an octet thus the length
must be even.
Access RC
Default Empty String
CLI Commands
set cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-data
<hexadecimal digit string>
show cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-data
6.11.2.18 LBM Transmit VLAN Priority
Description Priority. 3-bit value to be used in the VLAN tag, if present in the
transmitted frame.
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.1.1.32 (dot1agCfmMepTransmitLbmVlanPriority)
CLI Attribute Name lbm-tx-prio
CLI Syntax 0..7
Access RC
Default 0
CLI Commands
set cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-prio <prio>
show cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-prio
6.11.2.19 LBM Transmit VLAN Drop Eligibility
Description Drop Enable bit value to be used in the VLAN tag, if present in the
transmitted frame.
For more information about VLAN Drop Enable, see IEEE 802.1ad.
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.1.1.33
(dot1agCfmMepTransmitLbmVlanDropEnable)
CLI Attribute Name lbm-tx-drop
CLI Syntax {enable | disable}
Access RC
Default Enable
CLI Commands
set cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-drop enable
show cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-drop
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]