User manual

Page 199
6.11.2.14 LBM Destination MEPID
Description The Maintenance Association End Point Identifier of another MEP in the
same Maintenance Association to which the LBM is to be sent. This
address will be used if the value of the column
dot1agCfmMepTransmitLbmDestIsMepId is True.
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.1.1.28 (dot1agCfmMepTransmitLbmDestMepId)
CLI Attribute Name lbm-dst-mepid
CLI Syntax Integer
Access RC
Default 0
CLI Commands
set cfm-mep <md-idx> <ma_idx> <mepid> lbm-dst-mepid
<mepid>
show cfm-mep <md-idx> <ma_idx> <mepid> lbm-dst-mepid
6.11.2.15 LBM Destination Type
Description The destination type indicator for purposes of Loopback transmission,
either the the unicast destination MAC address of the target MEP or the
MEPID of the target MEP.
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.1.1.29 (dot1agCfmMepTransmitLbmDestIsMepId)
CLI Attribute Name lbm-dst-type
CLI Syntax {mac | mepid}
Access RC
Default mac
CLI Commands
set cfm-mep <md-idx> <ma_idx> <mepid> lbm-dst-type mepid
show cfm-mep <md-idx> <ma_idx> <mepid> lbm-dst-type
6.11.2.16 Number of LBMs to Transmit
Description The number of Loopback messages to be transmitted.
SNMP Object ID 1.3.111.2.802.1.1.8.1.7.1.1.30 (dot1agCfmMepTransmitLbmMessages)
CLI Attribute Name lbm-tx-num
CLI Syntax 1..1024
Access RC
Default 1
CLI Commands
set cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-num <num>
show cfm-mep <md-idx> <ma_idx> <mepid> lbm-tx-num
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]