User manual

Page 193
6.10.2.4 Service Selector
Description Service Selector identifier to which the MP is attached, or 0, if none. The
type of the Service Selector is defined by the value of
ieee8021CfmMaCompPrimarySelectorType.
In the current implementation the type is always VLAN ID. Thus the
Service Selector is the Primary VLAN ID with which the Maintenance
Association is associated, or 0 if the MA is not attached to any VID.
SNMP Object ID ieee8021CfmMaCompPrimarySelectorOrNone
(1.3.111.2.802.1.1.8.1.6.4.1.3)
CLI Attribute Name vlan
CLI Syntax {none | 1..4094}
Access RC
Default None
CLI Commands
show cfm-ma <md-idx> <ma_idx> vlan
set cfm-ma <md-idx> <ma_idx> vlan 102
Dependencies The VLAN must be defined in the VLAN Table.
6.10.2.5 MHF Creation
Description Enumerated value indicating whether the management entity can create
MHFs (MIP Half Function) for this Maintenance Association.
SNMP Object ID ieee8021CfmMaCompMhfCreation (1.3.111.2.802.1.1.8.1.6.4.1.4)
CLI Attribute Name mhf-creation
CLI Syntax {mhf-creation none | default | explicit | defer}
Access RC
Default defer
CLI Commands
show cfm-ma <md-idx> <ma_idx> mhf-creation
set cfm-ma <md-idx> <ma_idx> mhf-creation none
6.10.2.6 MHF ID Permission
Description Enumerated value indicating what, if anything, is to be included in the
Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance
Association.
SNMP Object ID ieee8021CfmMaCompIdPermission (1.3.111.2.802.1.1.8.1.6.4.1.5)
CLI Attribute Name mhf-permission
CLI Syntax {mhf-permission none | chassis | mgmg | chassis-mgmg}
Access RC
Default None
CLI Commands
show cfm-ma <md-idx> <ma_idx> mhf-permission
set cfm-ma <md-idx> <ma_idx> mhf-permission none
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]