User manual

Page 19
2.3 System Installation
2.3.1 Required Tools
Ensure that you have the following tools with you when performing the FibeAir 70
installation:
• Standard handheld digital voltage meter (DVM) with probes
• Standard open-end wrench, 1/2- inch (13 millimeter)
• Hexagonal wrench, (13millimeter)
• Philips screwdriver (medium size head for grounding connection)
• Cable ties (for securing network and optional power cables)
• Cutter
2.3.2 Activities Prior to Installation
• F
ibeAir 70 units must be installed in pairs, working with two technicians. One
technician is located at each node, in order to align and calibrate each antenna
ODU with its remote node pair for best performance.
• The expected receive signal strength for each antenna ODU (read from the DVM)
must be calculated prior to the installation procedure, based on the network link
budget.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]