User manual

6.9
Maintenance Association
6.9.1 MA Commands
Note:
MA CLI commands are available only when the
feature is enabled
6.9.1.1 Set
set cfm-ma <md-
idx> <ma
[interval <ccm-
interval>]
Note that ma-name
is mandatory in the Set command. The name must be unique in the
system.
6.9.1.2 Show
show cfm-ma {<md-idx-
list> | all} {<ma
interval | info}
6.9.1.3 Clear
clear cfm-ma {<md-idx
-
6.9.2 MA Attributes
6.9.2.1
MD Index
This is the same attribute as the one described in
enables use of the common command structure.
Maintenance Association
MA CLI commands are available only when the
FibeAir 70
Provider Bridge
feature is enabled
.
idx> <ma
-idx> [format <ma-name-
format>] [name <ma
interval>]
is mandatory in the Set command. The name must be unique in the
list> | all} {<ma
-idx-list> | all}
{name | component |
-
list> | all} {<ma-idx-list> | all}
MD Index
This is the same attribute as the one described in
Section 6.8.2.1
. Entering the MD Name
enables use of the common command structure.
Page 188
Provider Bridge
format>] [name <ma
-name>]
is mandatory in the Set command. The name must be unique in the
{name | component |
. Entering the MD Name
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]