User manual

Page 155
This object is accessible via SNMP Only
Description Average carrier to interference noise ratio [-6..30]
SNMP Object ID rfAverageCinr (1.3.6.1.4.1.31926.2.1.1.18)
SNMP Syntax integer
Access RO
5.14.2.15 Average RSSI
This object is accessible via SNMP Only
Description Average received signal strength indication, measured in DB. [-100..-60]
SNMP Object ID rfAverageRssi (1.3.6.1.4.1.31926.2.1.1.19)
SNMP Syntax integer
Access RO
5.14.2.16 RF Temperature
Description The current temperature of the RF device.
CLI Attribute Name rf-temperature
SNMP Object ID rfTemperature (1.3.6.1.4.1.31926.2.1.1.26)
Value Varies
Access RO
Default N/A
Dependencies None
5.14.2.17 Transmit Asymmetry
Description Percentage of the TX part in the airframe.
SNMP Object ID TBD
CLI Attribute Name tx-asymmetry
SNMP Syntax integer
CLI Syntax {25tx-75rx | 50tx-50rx | 75tx-25rx}
Access RW
Default Value 50tx-50rx
5.14.2.18 Lowest Modulation
Dropping below the Lowest Mode causes RF link failure.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]