User manual

Page 150
5.14 RF
The RF object corresponds to definitions in the private Ceragon SNMP MIB
(1.3.6.1.4.1.31926.1).
5.14.1 RF Commands
5.14.1.1 Set
C
reate and modify RF device characteristics using the Set command:
set rf
[num-of-channels 1..2]
[frequency 0 | 50000..80000]
[role master | slave]
[mode adaptive | static <mod> <scnum> <rep> <fec> | alignment]
[rx-ber-test disable | enable]
[tx-ber-test disable | enable]
[rx-link-id <int>]
[tx-link-id <int>]
[cinr-low -127..127]
[cinr-interval 0..2000]
[rssi-interval 0..2000]
5.14.1.2 Show
Display RF device characteristics using the Show command:
show rf {info | operational | tx-state | rx-state | cinr | rssi
| num-of-channels | channel-width | frequency | role | mode
| rx-ber-test | tx-ber-test | rx-link-id | tx-link-id | cinr-low
| cinr-interval | rssi-interval | rf-temperature | statistics}
5.14.1.3 Clear
Delete RF device statistics using the Clear command:
clear rf statistics
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]