User manual

Page 137
5.10 Forwarding Data Base (FDB)
The FDB object enables access to general parameters of the FDB Address Table, which
specifies configuration and control information for each Filtering Database currently
operating on the device.
Entries in the FDB Address Table appear automatically when VLANs are assigned FDB IDs in
the VLAN Table (See Section 5.6).
The system maintains 64 permanent instances of the FDB object.
This object corresponds to SNMP ieee8021QBridgeFdbTable object.
5.10.1 FDB Commands
5.10.1.1 Set
C
reate and modify FDB entries using the Set command:
set fdb s1 <fdb-id-list> [aging <aging-time>]
5.10.1.2 Show
Display FDB entries using the Show command:
show fdb [s1
[<fdb-id-list>
[{aging | full-table-counter | num-of-dynamic}]]]
5.10.2 FDB Attributes
5.10.2.1 Bridge Component ID
D
escription The component identifier is used to distinguish between the multiple
virtual bridge instances within a PBB.
CLI Attribute Name N/A
SNMP Object ID ieee8021QBridgeFdbComponentId (1.3.111.2.802.1.1.2.1.2.1.1.1).
It is an index to ieee8021QBridgeFdbTable (1.3.111.2.802.1.1.2.1.2.1)
Value s1 (forced)
Access N/A
Default s1
Dependencies In the current product version, the value of this object is equal to s1.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]