User manual

Page 124
5.6.3.9 State Trap
Description Indicates whether linkUp/linkDown traps should be generated for this
interface.
CLI Attribute Name N/A
SNMP Object ID ifLinkDownTrapEnable (1.3.6.1.2.1.31.1.1.1.14)
Value Disabled (2)
SNMP Access RW (Only a single value is allowed.)
5.6.3.10 High Speed Indication
Description An estimate of the interface's current bandwidth in units of 1,000,000 bits
per second.
CLI Attribute Name N/A
SNMP Object ID ifHighSpeed (1.3.6.1.2.1.31.1.1.1.15)
Value 1000
SNMP Access RO
5.6.3.11 Promiscuous Mode
Description This object has a value of False (2) if this interface only accepts
packets/frames that are addressed to this station. This object has a value
of True (1) when the station accepts all packets/frames transmitted on the
media.
CLI Attribute Name N/A
SNMP Object ID ifPromiscuousMode (1.3.6.1.2.1.31.1.1.1.16)
Value False (0)
SNMP Access RO
5.6.3.12 Connector
Description This object has the value True (1) if the interface sublayer has a physical
connector. Otherwise, this object has the value False(2).
CLI Attribute Name N/A
SNMP Object ID ifConnectorPresent (1.3.6.1.2.1.31.1.1.1.17)
Value False (2)
SNMP Access RO
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]