User manual

Page 122
5.6.3.1 Description
Description A textual string containing information about the interface. This string
should include the name of the manufacturer, the product name and the
version of the interface hardware/software.
CLI Attribute Name N/A
SNMP Object ID ifDescr (1.3.6.1.2.1.2.2.1.2)
Value ASCII representation of the VLAN ID
SNMP Access RO
5.6.3.2 Type
Description The type of interface. Additional values for ifType are assigned by the
Internet Assigned Numbers Authority (IANA), through updating the syntax
of the IANA ifType textual convention.
CLI Attribute Name N/A
SNMP Object ID ifType (1.3.6.1.2.1.2.2.1.3)
Value l2vlan (135)
SNMP Access RO
5.6.3.3 MTU Size
Description The size of the largest packet which can be sent/received on the
interface, specified in octets. For interfaces that are used for transmitting
network datagrams, this is the size of the largest network datagram that
can be sent on the interface.
CLI Attribute Name N/A
SNMP Object ID ifMtu (1.3.6.1.2.1.2.2.1.4)
Value 9216
SNMP Access RO
5.6.3.4 MAC Address
Description The interface's address at its protocol sub-layer.
CLI Attribute Name N/A
SNMP Object ID ifPhysAddress (1.3.6.1.2.1.2.2.1.6)
Value The MAC address of the corresponding Eth.
SNMP Access RO
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]