User manual

Page 112
5.4.2 Bridging Port Attributes
5.4.2.1 Component ID
Description The component identifier is used to distinguish between the multiple
virtual bridge instances within a PB.
CLI Attribute Name N/A
SNMP Object ID ieee8021BridgeBasePortComponentId (1.3.111.2.802.1.1.2.1.1.4.1.1)
Value <comp-id-list>
Access N/A
Default N/A
Dependencies Component identifiers must be defined in the Bridge Component table
(See Section 5.3).
5.4.2.1.1 Bridge Base Port
Description The number of the port for which this entry contains bridge management
information.
In the CLI port name is used instead of number.
CLI Attribute Name N/A
SNMP Object ID ieee8021BridgeBasePort (1.3.111.2.802.1.1.2.1.1.4.1.2)
Value host, eth0, eth1, eth2, s1, c2, c3, c4
Access N/A
Default N/A
Dependencies None
5.4.2.1.2 Bridge Port Interface Index
Description The interface that corresponds to this port.
CLI Attribute Name interface
SNMP Object ID ieee8021BridgeBasePortIfIndex (1.3.111.2.802.1.1.2.1.1.4.1.3)
Value
host, eth0, eth1, eth2
In the current version, when a port is bound to an internal interface (s1,
c1, c2, c3, c4) then the value for this attribute is 0.
Access RO
Default N/A
Dependencies None
5.4.2.1.3 Bridge Port PVID
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]