User manual

Page 111
[admit untagged | tagged | all]
[filter enabled | disabled]
When the Provider Bridge feature is disabled, use the following syntax:
set bridge-port <bridge-port-list>
[<comp-id-list>]
[pvid <vlan>]
[prio {0..7}]
[admit untagged | tagged | all]
[filter enabled | disabled]
When the Provider Bridge feature is disabled <bridge-port-list> can only include the
external ports eth1, eth2, eth0 and Host.
5.4.1.2 Show
Display bridging port attributes using the Show command.
When the Provider Bridge feature is enabled, use the following syntax:
show bridge-port [[{<comp-id-list> | all}] {<bridge-port-list> | all}
[{ info | mac-addr | num-ports | interface | pvid | prio
| admit | filter | gvrp | vlan-restricted | last-pdu-origin
| statistics}]]
When the Provider Bridge feature is disabled, use the following syntax:
show bridge-port [{<bridge-port-list> | all}
[{ info | mac-addr | num-ports | interface | pvid | prio
| admit | filter | gvrp | vlan-restricted | last-pdu-origin
| statistics}]]
When the Provider Bridge feature is disabled <bridge-port-list> can only include the
external ports eth1, eth2, eth0 and Host.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]