Specifications

FibeAir 4800 Installation and Operation Guide Chapter 4 Configuration
FibeAir 4800 Installation and Operation Guide 4-31
4.16 Managing Configuration Files
Saving FA4800 Configuration in a File
FA4800 management software allows you to save configuration parameters of the
local and remote units on the management station as an INI file. Each site is saved
in a separate INI file.
®
To save the configuration in a file:
1. Click Configuration from the main menu.
2. Select which site to backup.
The configuration dialog box opens.
3. Click Backup.
4. In the Save As dialog box, indicate in which folder and under what name
configuration file is to be saved, and click Save.
Restoring a Configuration File
Configuration files (*.ini) can be uploaded from the management station. Verified
configuration files can be distributed to other units that use the same
configuration.
®
To restore a configuration file:
1. From the Configuration menu, select the site to reconfigure.
The Configuration dialog box opens.
2. Click Restore.
3. From the Open dialog box select *.ini file to upload and click OK.
4.17 Reinstalling the Link
It may be necessary to reinstall the link if the ODUs should need to be
realigned.
Reinstalling the link causes both sites to go into install mode.
®
To reinstall the link:
1. Click Configuration in the Menu bar and select any one of the sites.
The Configuration dialog box opens.
2. Click the Install Mode button in the Configuration dialog box.
A message box asking if you want to enter install mode appears.
3. Click Yes to continue.
FA4800 enters install mode and the beeper starts beeping.
4. Realign the ODUs and complete the Installation wizard (see Chapter2).
Note