Specifications

FibeAir 4800 Installation and Operation Guide Chapter 4 Configuration
FibeAir 4800 Installation and Operation Guide 4-29
Forgotten the Link Password
In case of a forgotten link password, the user may enter the key password supplied
with the product. The key password may be obtained from customer support after
validation of the device serial number or MAC address. The user may change the
link password of both sides of the link at any time using the Link Configuration
Wizard.
®
To enter the key password:
1. From the Configuration dialog box, select the Security tab.
2. Click Change next to the Link Password field box.
The Change Link Password dialog box appears.
3. Click the Forgot Link Password button.
The Key Link Password dialog box appears.
4. Type the key link password.
5. A new link password may now be set.
4.14 Muting the Beeper
The ODU beeper starts beeping as soon as power is supplied, and continues until
the ODUs are aligned and the link established.
It is possible to mute the beeper until the alignment procedure is to be performed.
®
To mute the beeper:
1. Click on Configuration in the Menu bar and select the relevant site.
The Configuration dialog box opens.
2. In the Configuration dialog box, click the Buzzer button. The button toggles
between on and off.
3. The Beeper stops.
®
To restore the beeper:
1. Click Configuration in the Menu bar and select the relevant site.
The Configuration dialog box opens.
2. In the Configuration dialog box, click the Buzzer button. The button toggles
between on and off.
3. The Beeper starts.