Specifications

Chapter 4 Configuration FibeAir 4800 Installation and Operation Guide
4-28 FibeAir 4800 Installation and Operation Guide
4.13 Changing Passwords
There are two passwords necessary to use the FA4800 system. The first is
encountered when running the management software, the second, the link
Password is used for encryption purposes and is found when installing or
configuring the link.
Changing the Management Password
®
To change the management password
1. From the Tools menu, select Change Password
2. The Change Password dialog box appears.
3. Enter current password, and new password.
4. Click OK to confirm.
Changing the Link Password
FA4800 Radio Link is encrypted using Advanced Encryption System (AES) using a
128 bit dynamic key. During the installation process a Link Password must be set.
An Initial encryption key is generated. Each time a link is established the
Encryption key is validated. If the validation failed the link is established but no
service or configuration is allowed. In this state the user can change the link
password of each of the sites.
®
To change the Link Password:
1. From the Configuration dialog box, select the Security tab
2. Click Change next to the Link Password field box.
The Change Link Password dialog box appears.
3. Enter the current link password.
4. Enter the new password.
5. Enter the new password again in the Confirm box.