Manualshelf

Specifications

ManualsBrandsCeragon ManualsComputer equipmentFA4800
12345678910
Quick Start FibeAir 4800 Installation and Operation Guide
6 FibeAir 4800 Installation and Operation Guide
5. Connecting the User Equipment
®
To connect user equipment to the IDU:
1. Connect the user equipment (such as PBX) to the IDU RJ-45 port designated
Trunk:
On the rear panel of the IDU-E
On the front panel of the IDU-C
2. Connect user hub/router or any other compatible device to the IDU RJ-45 port
designated LAN.
On the rear panel of the IDU-E
On the front panel of the IDU-C
• IDU-C has an integrated LAN switch that provides two 10/100BaseT ports. The
Integrated LAN switch does not support spanning tree.
• The two LAN ports can be connected to two separate LAN segments.
Do not connect both LAN ports to the same LAN segment, a loop will be created
that will flood the network.
Notes
Caution