Specifications

Chapter 4 Configuration FibeAir 4800 Installation and Operation Guide
4-16 FibeAir 4800 Installation and Operation Guide
Figure 4-10. Configuration Dialog Box
3. Select the appropriate item in the left hand list to open a dialog box.
4. Click Apply to save the changes.
4.7 Changing the Transmit Power
Each site can have a different transmit power level.
®
To change the Transmit Power:
1. Click Configuration from the main menu.
2. Select which site to configure.
The Configuration dialog box opens.
3. Select Air Interface.
4. Select the required Transmit Power Level. Table 4-2 shows the available
power limits for each FA4800 system.
5. Click Apply to save the changes.