Specifications

FibeAir 4800 Installation and Operation Guide 3-1
Chapter 3
Operation
This section provides the following information for FA4800:
• Operating procedures (turning-on and turning-off)
• IDU indicators
• Normal Indications
• Default settings
• Managing the FA4800
3.1 Turning On FA4800
®
To turn on FA4800:
• Connect the AC/DC converter to the IDU power connector and to the mains.
See Chapter 2 for full instructions on connecting the power.
The PWR indicator lights up (IDU-E only) and remains lit as long as the
IDU is receiving power.
FA4800 requires no operator attention once installed, with the exception of
occasional monitoring of front panel indicators and statistics data. Intervention is
only required when FA4800 must be configured to its operational requirements, or
diagnostic tests are performed.