Specifications

Chapter 2 Installation and Setup FibeAir 4800 Installation and Operation Guide
2-18 FibeAir 4800 Installation and Operation Guide
The Channel Setting dialog box appears. This dialog box may be different
according to the version that you have purchased.
Selecting Channels
FA4800 later than version 1.300 have a feature called Automatic Channel Select,
which allows you to define several alternative frequency channels if interference is
detected on the channel in use.
• For FA4800 with the Automatic Channel Select feature see FA4800 with
Automatic Channel Select (applies to versions after 1.300).
• For FA4800 5.4 GHz ETSI version see FA4800 5.4 GHz ETSI Version.
FA4800 with Automatic Channel Select
Automatic Channel Select gives FA4800 the ability to change frequency channels
automatically if interference is detected on the current operating channel.
Figure 2-12. Channel Select dialog box - Automatic Channel Select
17. Select the main frequency from the Installation Channel menu.
18. Select the required Channel Bandwidth 5, 10, or 20 MHz.
F2.x GHz versions operate at 10 or 20 MHz steps only.
Note