Specifications

FibeAir 4800 Installation and Operation Guide 1
Quick Start Guide
Installation of FA4800 should be carried out only by a qualified technician. If you
are familiar with FA4800, use this guide to prepare the units for operation. If you
are not familiar with FA4800, please read the Installation and operation Manual
carefully.
1. Equipment Required
The following is a list of equipment required for installing a FA4800 link:
• RJ-45 crimp tool (if pre-assembled cable is not used)
• Drill (for wall mounting only)
• IDU and ODU grounding cables
• 13 mm (½″) spanner/wrench
• ODU to IDU cable if not ordered (outdoor class, CAT-5e, 4 twisted pairs)
• Cable ties
• Laptop running Windows 2000 or Windows XP.
2. Before the Installation
1. Verify that all equipment and tools are available.
2. Install the FA4800 software on the laptop; the installation takes several
minutes.
The software installation leaves the FA4800 Manager icon on the desktop.