Specifications

FibeAir 4800 Installation and Operation Manual Chapter 1 Introduction
FibeAir 4800 Installation and Operation Guide 1-5
Figure 1-2. FA4800 Units
IDU-E
The front panel of the IDU-E includes five LEDs, which display the status of E1/T1
traffic, wireless link, self-test results, the ODU-to-IDU link, and power status. For a
detailed description of the front panel LEDs, see Chapter 3.
The rear panel of the IDU includes the connectors for power, WAN, LAN, E1/T1,
and the ODU. The wiring specifications are detailed in Appendix A. The rear panel
LEDs are described in Chapter 3.
IDU-C
The IDU-C front panel includes four LEDs that display the status of E1/T1and,
wireless link, self-test results, and ODU-to-IDU link. For a detailed description of
the front panel LEDs, see Chapter 3.
ODU
ODU includes a power connector, which receives -48 VDC, and RJ-45 for
Ethernet traffic from the IDU. The ODU is attached to a mast using a special
mounting kit, which is supplied with the unit.
The ODU can be used with an integrated antenna, as illustrated in Figure 1-2, or
with an external antenna. If an external antenna is to be used, then the ODU is
supplied fitted with an N-type connector.