Specifications

FibeAir 4800 Installation and Operation Guide D-1
Appendix D
AIND Antenna Alignment
Procedure
Use this procedure when using the all indoor system FA4800-ANID or manually
aligning two FA4800 units.
To achieve the best benefit and link budget from the FibeAir installation, the link
antennas must be aligned; the two antennas should exactly face each other.
In order to achieve the best performance, the line of sight must be as clear as
possible with no obstructions between the two sites.
Prior to attempting FibeAir alignment, install the hardware and software in
accordance with the FA4800 Installation and Operation Manual. Figure D-1 shows
the link setup. At least two people are needed to perform the alignment
procedures.
Once the alignment is complete, you are able to evaluate the quality of the link.
Site A
Site B
AirMux
IDUx
IDUx
Figure D-1. FA4800 Link Setup