User's Manual Chapter 3

FibeAir 1500 Installation & Operation Manual Chapter 3. Installation
Revision 2.0 Installation Verification 3-41
3.11.3. Checking the ODU Configuration
1. Select Configuration ½ ODU.
The ODU Configuration window is displayed.
Figure 3-41 ODU Configuration Window
2. Verify that the remote side of the ODU Configuration window is active
(values can be changed).
3. Verify that the Monitored Rx displayed is as previously measured by the
DVM (Unfaded RSL).
If any problems were encountered during the checks described above, refer
to
Chapter 6 - Troubleshooting & Diagnostics .