User's Manual Chapter 3

Chapter 3. Installation FibeAir 1500 Installation & Operation Manual
3-38 Installation Instructions Revision 2.0
3.10.5. Safety and Grounding
The pole, antenna mount assembly and feed cables must be grounded in
accordance with current national and local electric codes to protect from
surges due to nearby lightning strikes. The following figure illustrates a
typical grounding method.
Clamps that provide a solid connection between ground wire and ground
source should be used.
Figure 3-38 Grounding the ODU Assembly
The ODU installation and initial alignment is now complete. Repeat this
procedure for the opposing ODU.