User's Manual Chapter 3

Chapter 3. Installation FibeAir 1500 Installation & Operation Manual
3-16 Installation Instructions Revision 2.0
3.9.13.2. One Foot Antenna Assembly − Installation Instruction
Warning
It is important to mount the antenna exactly as described in this
installation instruction. Giganet disclaims any responsibility for the result
of improper or unsafe installation. These installation instructions have
been written for qualified, skilled personnel.
Refer to the following figure, while performing the installation instructions
given.
Figure 3-12 Antenna Assembly - One Foot Antenna
4 screws B4.2
Drain plug
2 bolts M8 x 25
2 washers 8.4
∅ 25
Bolt M8 x 25 U bolt M10
2 washers 10.5
∅ 30
4 nuts M10
Bolt M8 x 30
Bolt M8 x 30
ELEVATION spindle M8 x 145
2 brass nuts M8
2 washers 8.4
AZIMUTH spindle M8 x 145
*
2 brass nuts M8
2 spherical washers C 8.4
2 conical seats D 9.6
Safety collar *
U bolt M10
2 washers 10.5
∅ 30
4 nuts M10
Bolt M8 x 30
Washer 8.4
SL nut M8
* safety collar and azimuth spindle
(on request)