User's Manual Chapter 3

Chapter 3. Installation FibeAir 1500 Installation & Operation Manual
3-10 Installation Instructions Revision 2.0
3.9.9. Connecting to the IDU using the serial port
1. Double-click on the icon which was added after performing the steps
detailed in Appendix A (My Computer½Dial-up Networking).
The Connect To window is displayed.
Figure 3-5 The Connect To Window
Note
At this time, there is no importance to the values of fields in the Connect To window.
2. Click Connect.
The Terminal window is displayed.
Figure 3- 6 The Terminal Screen Window
3. Click Continue.
The Connected To window is displayed.
4. Select Start ½ Program ½ GiganetView.
The RunEnv Parameters window is displayed.