Installation Instructions Chapter 4

Chapter 4. System Setup FibeAir 1500 Installation & Operation Manual
Revision 2.0 The Setup Procedure 4-3
For a more detailed description of the HyperTerminal configuration
procedure, refer to the following section 4.2.2 – “Connecting to the
HyperTerminal.”
4.2.2. Connecting to the HyperTerminal
Setting Up the HyperTerminal Connection
To set up the HyperTerminal connection, perform the following operations:
1. Connect the RS232 port of your computer to the Terminal port of the
IDU.
2. Select Start ½ Programs ½ Accessories ½ Communication ½
HyperTerminal.
3. Double-click the HyperTerminal application icon.
4. In the Connection Description box, enter the name Terminal and click
OK.
5. In the Connect Using field (in the Phone Number box) select Direct to
Com 1 and click OK.
6. In the Port Settings tab (Com 1 Properties box) configure the following
settings:
— Bits per second – 19,200
— Data bits - 8
— Parity - None
— Stop bits - 1
— Flow control - Hardware
7. Click OK.
8. End the HyperTerminal connection.
Connecting to the Terminal
To connect to the terminal, perform the following operations:
1. Connect the RS232 port of your computer to the Terminal port of the
IDU.
2. Select Start ½ Programs ½ Accessories ½ HyperTerminal.
3. Double-click the Terminal connection icon. The HyperTerminal screen
opens.
4. Enter the password giganet and press Enter. The Main Configuration
Menu appears.
Note : The Terminal screens are depicted here as black text on a white background for ease
of reading. The original screens are white text on black background.