Installation Instructions Chapter 4

FibeAir 1500 Installation & Operation Manual Chapter 4. System Setup
4-24 Management Setup (Optional) Revision 2.0
1. In the SLIP IP Address field, set the SLIP IP Address column to zeros.
2. (Optional) In the
SLIP Modem phone number field, enter the SLIP
Modem phone number.
3. In the
Baud Rate field, Select the baud rate of your modem.
The baud rate of the PC and the FibeAir 1500 system must be the same in
order to provide a valid connection between the PC and the IDU. By default,
the IDU’s baud rate is set at 19,200. For details on how to set the PC baud
rate, refer to section 3.9.7.
4.7.2. Defining the Managers List
The Managers List section of the System Configuration window allows you
to determine up to three managers to whom the system alarms can be sent.
Figure 4-16 Managers List
1. Enter the IP addresses of up to three system managers.
4.7.3. Defining Alarm Groups
The Alarm Groups section of the System Configuration window allows you
to determine which alarms are included in the log file of each manager
using the Alarm Group section of the window.
1. In the column of each manager, click on the types of alarms you want to
include in the log file of that manager.