Installation Instructions Chapter 4

Chapter 4. System Setup FibeAir 1500 Installation & Operation Manual
Revision 2.0 Management Setup (Optional) 4-23
4.7. Management Setup (Optional)
This section is required for network management configuration. If your
application only requires stand alone management, you may skip the
following procedure.
1. Select Configuration ½ General Settings.
The System configuration window is displayed.
Figure 4-14 System Configuration window
The System Configuration window is divided into three sections:
■ Local Device Communication Parameters
■ Managers List
■ Alarm Groups.
4.7.1. Setting Local Device Communication Parameters
Figure 4-15 Local Device Communication Parameters