Installation Instructions Chapter 4

Chapter 4. System Setup FibeAir 1500 Installation & Operation Manual
Revision 2.0 SONET/SDH Configuration (Optional) 4-21
The System Up Time field is read-only.
The ODU Serial Number field is read-only. It displays the serial number of
the ODU unit.
The IDU Serial Number field is read-only. It displays the serial number of
the IDU unit.
7. Click Apply.
The definitions and settings determined in the General Information
window are saved.
8. Click Cancel.
The General Information window is closed and you are returned to the
Work Area window.
4.6. SONET/SDH Configuration (Optional)
The SONET/SDH Configuration window allows you to change threshold
levels for the radio and SONET/SDH alarms and to configure special
SONET/SDH transmission parameters. This is recommended for advanced
users only.
1. To define SONET/SDH Configuration, select Configuration ½
SONET/SDH.
The SONET/SDH Configuration window is displayed.
Figure 4-13 SONET/SDH Configuration Window