Installation Instructions Chapter 4

FibeAir 1500 Installation & Operation Manual Chapter 4. System Setup

4-20 Defining System Information Revision 2.0

4.5. Defining System Information

1. Select Configuration ½ System Information.

The General Information window is displayed.

Figure 4-12 General Information Window

2. In the Time field, enter the current time of day in HH:MM:SS format.

3. In the Date field, select the month using the pull-down menu and enter

the day of the month and year.

The Description field is read-only. It displays a textual description of the

entity. This value should include the full name and identification of the

system’s hardware type, software operating system, and networking

software.

The Object ID field is read-only. It displays the vendor’s authoritative

identification of the network management system contained in the entity.

4. (Optional) In the Name field, enter an administrative-assigned name for

this managed node (link). By convention, this is the node’s fully-qualified

domain name.

5. (Optional) In the Contact field, enter the name of a person to contact in

case of problems with the system.

This should include textual identifier of the contact person for this

managed node, together with information on how to contact this person.

6. (Optional) In the Location field, enter the actual physical location of the

node or agent (e.g., ‘telephone closet, 3

floor’).