User's Manual Part 9

using M20 x 45mm long bolts, lockwashers & nuts. Fully

tighten hardware.

Attachment of Mounting Bracket Assembly

to Antenna. (Refer to Figures.2, 4 & 5). Attach

assembled mounting bracket to hinges at positions 'A' &

'B' using M20 x 45mm long bolts, lockwashers & nuts

and connect eyebolt to hinge assembly at position 'C'

using M12 x 45mm long bolt, lockwasher & nut. Do not

tighten hardware. Thread M20 locknut approximately

halfway along eyebolt, then add concave adjustment nut

and convex washer. Slip eyebolt through hole in mount

angle. Add other convex washer, concave adjustment

nut and locknut as shown ensuring that convex washers

and concave nuts engage properly.

Mounting Bracket

Attachment of Suspension Parts.

(Refer to Figures.2, 4 & 5). Attach hinges to the

reflector mounting ring at positions 'A', 'B' & 'C' in Figure 1,

Figure 4. Attachment of Mounting Bracket

Mount Angle

M20 Locknut

Convex

Washer

Concave Adjustment

Nut No.1

M20 Eyebolt

M12 x 45mm lg Bolt

Reflector

Mounting Ring

Figure 5. Antenna Elevation Adjustment Assembly

Concave Adjustment

Nut No.2

M20 Lockwasher

& Nut

Hinge

Reflector

Mounting Ring

M20 x 45mm lg

Bolt

M20 Lockwasher

& Nut

Elevation Hinge

Bracket

M12 Lockwasher

& Nut

M20 Locknut

M20 x 45mm lg Bolt